Nice item
5
Perfect for the application, great price, super delivery.
Dana
Prospect Heights IL
1/5
Our knowledgeable team & licensed plumbers are here to help.
This Round Recessed Ring Pull is great for use on a pocket door, small floor hatch or even cabinet drawers. Offered in several premium finishes to suit any decor.
Ships in 1 - 2 Business Days
-
Product Details
- Material: Brass
- Design: Craftsman
- Made of solid brass.
- Small pull measures 1-1/2" diameter.
- Large pull measures 2" diameter.
- Fits flush against door with 3/8" deep center recession.
- Includes fastening hardware.
- Sold individually.
- Technical Information
-
Reviews
Came as expected1
5Came as expected but I was short 1 piece out of 2. I called customer service and they immediately sent out the missing piece! Great service and great product!
Bunker
Freedom Wy
Perfect!
5Exactly what we were looking for. This is the only place we found the size we needed.
Sue
upstate NY
These pulls do not disappoint (if you can install them)
5If you have access to the large forstner bits, and the patience to slowly sand/chisel away wood until the piece fits perfectly, then you will be quite happy with the results. I installed these pulls on a crawlspace access inside a small closet. The floor is 3/4" oak over plywood. The pulls have been working great and look great on the oak floor, staying out of the way most of the time as they should. The photo is about a year after installation. You can see the finish has begun to tarnish, which makes me like it more. :)
Joe
San Jose, CA
The ring pull is perfect
5I ordered the larger ring pull for the sliding barn door on the bathroom entryway. It fits flush to the door and does not interfere with the sliding door along the wall . It works perfectly.
charlie&helen
Temperance, MI
I would purchase this again.
5see comments above
telly
Shelbyville,Ky
Good quality for the price.
4I bought (3) of the 2" chrome pulls to replace my 1 3/4'' brass pulls. Good finish. Minor hole modifications needed for the bigger pull.
Bill
Dallas TX
Was expecting better
2Mounting screws were weak and broke off, even with pre-drilled holes. And, had to router too close to drill holes for my liking for proper inset.
GF
Undisclosed
Recessed door pull
5High quality product including finish
Ed
Undisclosed
Good Recessed Pulls
4We used these small recessed pulls on the pantry doors. Unfortunately, the pantry cabinets were installed too close to the wall and there wasn't enough clearance next to the wall to fully open one of the doors using a normal cabinet handle without maring the wall. These small recessed pulls worked well and they were a good match for the existing oiled bronze cabinet hardware. They look good and the price was right.
DogRunWild
Undisclosed
Round Recessed Ring Pull
4.5 10100.0
Related Products
Round Recessed Ring PullThis Round Recessed Ring Pull is great for use on a pocket door, small floor hatch or even cabinet drawers. Offered in several premium finishes to suit any decor.Signature Hardware
Drawer Pulls
10.95
Drawer Pulls
12.95
Drawer Pulls
11.95
Drawer Pulls
11.95
Drawer Pulls
11.95
Drawer Pulls
11.95
Drawer Pulls
13.95
Drawer Pulls
13.95
Drawer Pulls
13.95
Drawer Pulls
12.95
Good Recessed PullsDogRunWildWe used these small recessed pulls on the pantry doors. Unfortunately, the pantry cabinets were installed too close to the wall and there wasn't enough clearance next to the wall to fully open one of the doors using a normal cabinet handle without maring the wall. These small recessed pulls worked well and they were a good match for the existing oiled bronze cabinet hardware. They look good and the price was right.
4
Recessed door pullEdHigh quality product including finish
5
Not for fine woodworkingThe Old Pueblo WorkshopI bought these flush ring pulls for a table for my nephew with removable wooden lids. I was expecting that these pulls would be much closer to a prefect circle than they are. Don't expect a forstner bit to get the job done without gaps. I ended up using a router and had to inlay each one by hand. The money I saved went right into labor...
They are sturdy, however. I expect they will be up to the task mechanically. I was just expecting a more uniform edge.
3
bad finishsgk65I ordered antique brass and received something with a bronze finish labeled antique brass.
2
PerfectMiraBought this to replace stainless version on sailboat. Very heavy high quality. Hopefully will not become victim of salt air corrosion. Time will tell!
5
Was expecting better GFMounting screws were weak and broke off, even with pre-drilled holes. And, had to router too close to drill holes for my liking for proper inset.
2
701006Round Recessed Ring Pull
Hardware >
