866-855-2284
Phone Hours
  • Mon-Thurs :
    8:00AM - 11:00PM
  • Friday :
    8:00AM - 7:00PM
  • Saturday :
    8:00AM - 5:30PM
*All Hours EST

Menu
0
4x10
2x10
2x12
2x14
4x10
4x12
4x14
6x10
6x12
6x14

1/9

2x10
2x12
2x14
4x10
4x12
4x14
6x10
6x12
6x14
SKU: 925687

Wicker Style Cast Iron Wall Register

Starting at $37.95

List Price $48.95

* Required Fields

Email an Expert

* Required Fields

SUCCESS MESSAGE GOES HERE

Our knowledgeable team & licensed plumbers are here to help.
855-758-7040
Known for its durability and timeless appeal, cast iron makes the Wicker Wall-Mount Register a must-have for a traditional home. Captivating shapes take this accent from standard to extraordinary. Included are adjustable louvers to direct air flow.

Ships in 1 - 2 Business Days

  • Product Details
    • Design: Wicker
    • Product Finish: Black
    • Material: Cast Iron
    • Installation Type: Wall
    • Louvers: Yes
    • Louver Control Extension from Register: 3/4"
    • Mounting Hardware Included: Yes
    • Mounting Hardware Concealed: Yes
    • Made of heavy duty cast iron.
    • Made of 8mm-thick cast iron.
    • Black Powder Coat finish.
    • Includes four tension springs for securing into wall ducts. No screws required.
    • Louvers included.
    • Removable louvers.
    • To determine the size of your register, measure the actual opening in the floor. Do not measure the overall size of the existing register.
  • Technical Information
  • Reviews
    • Very tight fit

      Posted: 2/2/16 by Kilonen

      3
      Good looking replacement. Got 9 of these. All have an assembly error that causes the stamped metal Louver housing to bow in the middle about 1/4" making the grate a very tight fit in a standard duct constrained by hardwood floor. Was able to get them in with a sand mallet. Wasn't obvious to me how to re-assemble them myself so that the stamped louvre housing was rectangular for a drop in fit: Simple enough to take apart and move the housing inside the thread tangs on the bottom of the casting (which is how the casting was designed to be used) but then putting the assembly screws in has to be done from inside the louvre housing - maybe a kids hand could do that. Didn't feel like wrestling with it given I could force them in place - on the bright side they won't move around if the vacuum hits them.
    • OK - not grate

      Posted: 2/2/16 by Kilonen

      3
      This really a floor register with clips to hold it on a wall register. It is smaller than most standard wall registers so don't count on this to hide any blemishes from old grate. Wound up drilling my own holes in this to hold it higher on the wall to fully cover wall around top of register.

    2 Item(s)

    Write Your Own Review

    • For verification only, will not be shared. If you'd like to know more, see our privacy policy.

    * Required Fields

Wicker Style Cast Iron Wall RegisterKnown for its durability and timeless appeal, cast iron makes the Wicker Wall-Mount Register a must-have for a traditional home. Captivating shapes take this accent from standard to extraordinary. Included are adjustable louvers to direct air flow.925687
37.95
OK - not grate This really a floor register with clips to hold it on a wall register. It is smaller than most standard wall registers so don't count on this to hide any blemishes from old grate. Wound up drilling my own holes in this to hold it higher on the wall to fully cover wall around top of register.
3
Very tight fitGood looking replacement. Got 9 of these. All have an assembly error that causes the stamped metal Louver housing to bow in the middle about 1/4" making the grate a very tight fit in a standard duct constrained by hardwood floor. Was able to get them in with a sand mallet. Wasn't obvious to me how to re-assemble them myself so that the stamped louvre housing was rectangular for a drop in fit: Simple enough to take apart and move the housing inside the thread tangs on the bottom of the casting (which is how the casting was designed to be used) but then putting the assembly screws in has to be done from inside the louvre housing - maybe a kids hand could do that. Didn't feel like wrestling with it given I could force them in place - on the bright side they won't move around if the vacuum hits them.
3
601002Wicker Style Cast Iron Wall Register