All tub
faucets should be installed by a qualified, licensed plumber. Use teflon
tape on all threaded connections.
- Shut off the water
supply valves before installation.
- Screw the spout
(if applicable) #2940 and adapter #2806 onto the faucet body.
- Insert the faucet
through the 2 holes on the tub. Screw the lock nuts #3401 onto the threaded
shanks #4310 and tighten.
- Slip the washers
# 1830 and the brass nuts #3417 onto the supply tubes. Insert the supply
tubes into the shanks and tighten the nuts.
- Make no adjustments
to valves or valve stems. They are tested at the factory for optimum
performance.
See our Tub
Drain Tips and Water Supply Line Tips
for further instructions and diagrams.
|
| Shop Tub Faucets |
|
